Sigma Controls, Inc.
217 S. 5th St. Perkasie, Pa 18944
phone 215.257.3412 - fax 215.257.3416

Sigma Controls

Myriad TPC LITE Nema 4 - Mounted and wired in a Nema 4 Box

Delivery: 1 week. The Myriad TPC LITE is a smaller I/O version of the full size TPC. It operates constant or variable speed pumps.
Description

     

Myriad 'TPC' Triplex Pump Controller Lite

Standard Features:

  • Microprocessor Based
  • Graphic LCD Display
  • 5 Function Keys
  • Isolated 24VDC Sensor Power
  • 4/20MA, 1-5V, 0-5V, 0-10VDC Input
  • 1 Analog Input
  • 7 Digital Inputs
  • 4 Analog Outputs
  • 4 Relay Outputs 5 AMP
  • 4 Digital Outputs
  • Fully User Programmable in English
  • ‘MV Net’ Port RS485 +User Port
  • ‘Pop Up’ Alarm Screens

THE MYRIAD TPC LITE PROVIDES COMPLETE CONTROL FOR TWO OR THREE CONSTANT SPEED OR VARIABLE SPEED PUMPS

  • Displays level in numeric and bar graph forms
  • Displays pump call status
  • Allows full user selection of all system variables
  • Monitors critical alarms (motor over temperature, etc.)
  • Monitors non critical alarms (seal leak, etc.)
  • Monitors hand-off-auto selections switch position for each pump
  • Monitors pump (VFD) ‘run’ feedback
  • Provides digital and relay outputs for pump control, level alarm, sensor fail, pump fault
  • User selectable maximum number of pumps allowed to run
  • Provides 4/20MA outputs for VFD speed setting , proportional control and re-transmission
  • Provides time and date ‘stamped’ alarm information
  • Audible and visual alarms
  • Allows simulation of level to exercise pumps or verify operation
  • Provides resettable elapsed timers for each pump
  • Records “MAX” and “MIN” process values and a graphic trend display for trouble shooting
  • Available in 1/4 DIN panel mount and Nema 4X enclosures

The Myriad TPC LITE ushers in a new generation of pump controllers. From the ¼ Din 4” X 4” housing with fully removable P.C. board, to the 128 X 32 pixel bitmapped LCD display and simple user set up, the Myriad TPC LITE offers pump control and management for up to 3 pumps. The unit accepts two analog input signals. Relay outputs may be configured for pump control and alarms and are front panel programmable for ‘set’ and ‘reset’ points.

 
amex.gifvisa.gifmclogo.gif