Sigma Controls Series 5000 Pressure Sensors have been specifically designed for depth measurement in small bore holes at reservoirs, well farms, liquid storage facilities, pump stations, or any environment where reliable continuous level measurement is required. The solid state piezo-resistive pressure sensor is enclosed in a 316 stainless steel housing, isolated from the process liquid by a 316 stainless steel diaphragm. It provides excellent linearity, repeatability and low hysteresis.
Temperature compensated electronics are conformal coated after assembly and provide accuracy of 0.5% FS over the range being measured. The submersible cable is 20 gauge direct burial polyurethane jacket shielded type and is available in un-spliced lengths up to 600 feet. A high integrity waterproof seal at the entrance of the cable to the body provides protection for the internal electronics.
TO ORDER MODEL 5000 SMALL BORE SUBMERSIBLE PRESSURE SENSORS, SPECIFY MODEL NUMBER AND SPECIFIC CODES CORRESPONDING TO THE REQUIREMENTS.
EXAMPLE: 5000MP- 050-1-150
Unless otherwise specified, Sensors are supplied with Viton diaphragms.
030 0/30 PSIG 0-70 FT H20
050 0/50 PSIG 0-115 FT H20
100 0/100 PSIG 0-230 FT H20
150 0/150 PSIG 0-400 FT H20
300 0/300 PSIG 0-600 FT H20
1 = 4/20MA
2 = 4/20MA AND MODBUS
SK CABLE SUPPORT BRACKET
AC TVSS 120 VAC SURGE PROTECTION
DC TVSS 4/20MA SURGE PROTECTION
WC STAINLESS STEEL SUPPORT CABLE* PER FT
CABLE LENGTH DESIGNATION
WATERPROOF 20 GA. POLYURETHANE JACKET